Guangdong Meishicai auto paint Co., LTD
Guangdong Meishicai auto paint Co., LTD
Add to Cart
Fast Volatilization Rate Automotive Paint Thinner For Car Refinish Marine Clear Coat
Automotive paint thinner low smell and high solubility thinner for car refinish paint
Characteristic
1. It can reduce the viscosity of the resin and improve its process performance, and the liquid substance with good miscibility with the resin is added.
2. It can reduce the viscosity or consistency of the paint and facilitate the further processing of the paint.
3. It has oil pollution function. Before painting, the oil stain can be removed, and the machined parts can be immersed in the solution to clean the oil stain and increase the binding force.
4. Gasoline is also commonly used as paint thinner, but it is recommended that you do not use gasoline as paint thinner, because it will directly affect the effect of paint film.
Product description
| Fast Dry Thinner | The fastest volatilization rate, special thinner for 1K base paint. Apply to the partial repair or use it below 15 ℃. |
| Standard Dry Thinner | The medium volatilization rate, general purpose thinner for 1K base paint and 2K car paint. Suitable for and partial repair, used at 15 ℃ to 30 ℃. |
| Slow Dry Thinner | The slower volatilization rate, slow dry thinner for 1K base paint and 2K car paint. Applies to whole car spraying or large area spraying above 30 ℃. |
construction technology:
1. Clean&Shade
Remove wax oil and other impuritieswith deoiling detergent Examine andassess the location and extent of damage.
2. Grind damaged parts
Grinding with abrasive paper(#80# 2000). Dry grinding withsandpaper(#80, 120, 180) first.
3. Dust cleaning
Use a degreaser to remove greasefrom the workpiece.
4. Fill& Grind
Add thne hardener I proportionmix and fill the putty, Sanding(#80. 120, 180) after drying.
5. Clean &Grind
Clean the surface again, and thenfinely grind the filling to the leveof the paint.
6. Spray primer surfacer
Mix and spray primer according toproduct requirements, each layerneeds to be matte.
7.Grind primer surfacer
After the primer is dried, dry sandingpaper(3320-400)is used with atwo-way sander. Manual grindingon the edge(#600-800)
8. Clean & Wipe
Use a cleaner to clean the grease.and tack cloth to clear of dustand particles.
9. Spray 1K color paint
Add thinner as requiredspray2-3ayers, spray interval of 5-10nutes per layer.
10. Spray Varnish(clear coat)
Add hardener and thinner asrequired, spray two layerseach interval is 5-10 minutes.
11. Dry Bake
After the varnish is sprayed. it needbe allowed to stand for 10-15minutes can be baked or driednatur.
12. Waxing &Polish
Can be sanded with abrasivepaper(#2000)first if necessaryThen use related products forwaxing and polishing
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges